Elevate 70 mil PVC Inside Molded Corner Flashing, White (W56PAW1001)
PVC Inside Molded Corner Flashing
Elevate PVC Inside Molded Corner is a factory-formed flashing accessory designed to seal inside corner transitions on PVC roof systems. Made from non-reinforced DuPont Elvaloy® KEE, it helps create consistent, watertight details at curbs, parapets, scuppers, and similar conditions.
Key Features:
- Factory-Formed Corner Detail: Molded inside corner helps simplify flashing transitions and reduce field fabrication.
- Durable KEE Formulation: Made with non-reinforced DuPont Elvaloy® KEE for robust performance in PVC roofing details.
- Designed for Common Roof Conditions: Intended for inside corners on curbs, parapets, scuppers, and other appropriate flashing locations.
- Consistent System Match: PVC construction designed to integrate with PVC roof systems and accessories.
- Ready-to-Use Piece: Sold as an individual corner component for targeted repairs or new installations.
Please check the Product Data Sheet Here
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Elevate |
| Category | Flashing |
| Sub Category | Single Ply Membrane Flashing |
| Color | White |
| Material | PVC (DuPont Elvaloy® KEE, non-reinforced) |
| Type | Inside molded corner |
| Thickness | 70 mil |
| Width | 2-3/4 in (70 mm) |
| Height | 2-3/4 in (70 mm) |
| Applicable Standards | ASTM D3045; LEED |
| Manufacturer Number | W56PAW1001 |
| Product Number | FIRPVCISC |
| Pieces Per Carton | 20 |
| Unit of Measure | PC (Piece) |
| Item Weight | 1 lb |
Frequently Asked Questions (FAQ):
Q: What is this used for?
A: It’s a factory-formed PVC inside corner flashing piece used to detail inside corners on roof penetrations and transitions such as curbs, parapets, and scuppers.
Q: What material is it made from?
A: It is made from non-reinforced DuPont Elvaloy® KEE (PVC-based) material.
Q: What thickness is this corner?
A: This variant is 70 mil.
Q: What are the corner dimensions?
A: It is listed as 2-3/4 in. (70 mm) height and 2-3/4 in. (70 mm) width.
Q: Does it meet any standards or green building programs?
A: It is listed with ASTM D3045 and LEED.
A Crisp, Clean Finish for the Most Demanding Corners
There’s a quiet luxury in a detail that disappears—clean, precise, and perfectly resolved. This molded white PVC inside corner creates a seamless transition at the sharpest roofline moments, delivering a tailored finish where leaks love to begin. Think of it as architectural punctuation: refined, intentional, and built for longevity. When your envelope detailing is this polished, the entire structure feels elevated—because true luxury is performance you can trust.
Choose the Elevate PVC Inside Molded Corner to create clean, dependable inside-corner flashing details on your PVC roof system.
Original: $6.37
-70%$6.37
$1.91Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PVC Inside Molded Corner Flashing
Elevate PVC Inside Molded Corner is a factory-formed flashing accessory designed to seal inside corner transitions on PVC roof systems. Made from non-reinforced DuPont Elvaloy® KEE, it helps create consistent, watertight details at curbs, parapets, scuppers, and similar conditions.
Key Features:
- Factory-Formed Corner Detail: Molded inside corner helps simplify flashing transitions and reduce field fabrication.
- Durable KEE Formulation: Made with non-reinforced DuPont Elvaloy® KEE for robust performance in PVC roofing details.
- Designed for Common Roof Conditions: Intended for inside corners on curbs, parapets, scuppers, and other appropriate flashing locations.
- Consistent System Match: PVC construction designed to integrate with PVC roof systems and accessories.
- Ready-to-Use Piece: Sold as an individual corner component for targeted repairs or new installations.
Please check the Product Data Sheet Here
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Elevate |
| Category | Flashing |
| Sub Category | Single Ply Membrane Flashing |
| Color | White |
| Material | PVC (DuPont Elvaloy® KEE, non-reinforced) |
| Type | Inside molded corner |
| Thickness | 70 mil |
| Width | 2-3/4 in (70 mm) |
| Height | 2-3/4 in (70 mm) |
| Applicable Standards | ASTM D3045; LEED |
| Manufacturer Number | W56PAW1001 |
| Product Number | FIRPVCISC |
| Pieces Per Carton | 20 |
| Unit of Measure | PC (Piece) |
| Item Weight | 1 lb |
Frequently Asked Questions (FAQ):
Q: What is this used for?
A: It’s a factory-formed PVC inside corner flashing piece used to detail inside corners on roof penetrations and transitions such as curbs, parapets, and scuppers.
Q: What material is it made from?
A: It is made from non-reinforced DuPont Elvaloy® KEE (PVC-based) material.
Q: What thickness is this corner?
A: This variant is 70 mil.
Q: What are the corner dimensions?
A: It is listed as 2-3/4 in. (70 mm) height and 2-3/4 in. (70 mm) width.
Q: Does it meet any standards or green building programs?
A: It is listed with ASTM D3045 and LEED.
A Crisp, Clean Finish for the Most Demanding Corners
There’s a quiet luxury in a detail that disappears—clean, precise, and perfectly resolved. This molded white PVC inside corner creates a seamless transition at the sharpest roofline moments, delivering a tailored finish where leaks love to begin. Think of it as architectural punctuation: refined, intentional, and built for longevity. When your envelope detailing is this polished, the entire structure feels elevated—because true luxury is performance you can trust.
Choose the Elevate PVC Inside Molded Corner to create clean, dependable inside-corner flashing details on your PVC roof system.
